Lights 12 Volt DC

We sell the socket system of dolls house lighting which requires no soldering or electrical knowledge.  Plan which lights you want to go into each room and remember that our transformer LT33 will run up to 32 bulbs and not 32 lights. The basic set up is a transformer, a multi socket set and the lights of your choice.

Each light has a removable plug on approximately 60cm of wire, unwind the wire from each prong on the plug and pull the wire through the plug, make a hole in the wall and thread the wire through, re-attach the plug to the wire by passing the wire through the plug and winding one of the wires around each of the prongs to make the connection. Attach the socket set to the rear wall of the house and plug each light into the socket set. If you require more lights we sell single sockets, triple sockets, six and twelve socket sets. Which can be plugged into the first socket set to let you attach additional lights.

The spade connectors on the 6 or 12 socket sets attach to the transformer by unscrewing the 2 screws and placing the connectors underneath, then tighten the screws and plug the transformer into your electricity supply

Transformer LT33 - UK 3-Pin

Add to cart
  • Description

UK Three Pin Only

Suitable For Up To 32 Bulbs

weighs 540g

2 x LS 9015 Triple Extension Socket Strips

Add to cart
  • Description

Wire length 60cm, plug fitted

2.5cm =  1 Inch

Six Socket Fused Lighting Strip

  • Description

Takes up to 6 plugs

LS 9017 Lighting Fused Socket Strip (12 sockets)

Add to cart
ls9017 12 sokets
  • Description
Takes up to 12 plugs

Pack Of 4 Pea Bulbs 025

Add to cart

Pack Of 4 Candle Bulbs 024

Add to cart

Pack of 4 Push Fit Grain Bulbs 052

Add to cart
  • Description

Pack Of 4 12v Grain Bulbs

The bulb head measures 6mm long x 3mm high, these bulbs are suitable replacements for many of my dolls house lights that require push fit bulbs. You trim the wires to size and simply push the two wires into the corresponding holes on the light fitting.

4 x Single Extension Strips 9013

Add to cart
  • Description

Wire length 60cm, plug fitted

2.5cm =  1 Inch

Working 12 Volt 6cm LED Light Band 9064

Add to cart
  • Description

The plugs are fitted and the wire is 60cm long

2.5cm = 1 Inch

Working 12 Volt 12cm LED Light Band 9066

Add to cart
  • Description

The plugs are fitted and the wire is 60cm long

2.5cm = 1 Inch

4 Spare Fuses For A Lighting Strip Doll House Miniature Light Accessory 250 Volt 1.5Amp

Add to cart
  • Description

These fit into our LS 9017 Lighting Fused Socket Strip

 

12 Working Christmas Lights

Add to cart
  • Description

A String Of 12 Working Multi-coloured Lights

 the string of lights is 65cm long
  2.5cm = 1 Inch

50 Ft Of Dual Core Wire

Add to cart
  • Description

50 Feet Reel Of Dual Core Insulated Wire

the coin is 2cm diameter and is for reference only

2.5cm = 1 Inch

2 x Brass Round Light Switches

Add to cart
  • Description

2 x Round Brass Light Switch's

Non working for show only

The coin is 2cm diameter and is for reference only

2.5cm = 1 Inch

Double Light Switches

Add to cart
  • Description

A Double Light Switch

Non working for show only

The coin is 2cm diameter and is for reference only

2.5cm = 1 Inch